Natural oil gel stain

Instructions

Before you begin:

Stir carefully before use. Do a test beforehand in a discreet place to check if the color and effect obtained are those desired. The final result will be determined by the natural color of the wood species used.

Surface preparation:

• The wood, metal or fiberglass surface must be clean, dry and free of all dirt in order for the stain to adhere or to penetrate well.
• Ensure that the piece to be stained is properly sanded with a 120 – 150 grit sandpaper.

Application:

• Pour a small amount of stain onto the sponge included in the SamaN Stain Kit (60 – 002).
• Rub following the direction the wood grain.
• Wipe off the excess with a clean and soft cloth.
• Work in small sections to prevent the stain from drying between applications.
• Seal and protect your work with a clear SamaN’s satin, semi-gloss, gloss or matte finish varnish.

Drying time:

• 1 hour
• 2 hours before applying a varnish.

Cleaning tools:

Clean all tools and equipment with paint thinner. Dispose of all empty containers and unused stain in accordance with local, provincial and federal regulations.

Contenus téléchargeables

Downloadable content