Legend tung oil

Instructions

Before you begin:

Our Tung oil can only be applied onto bare or stained wood. Created for all interior wood surfaces such as paneling, woodwork, hardwood floors, furniture, frames and moldings and so much more.

Surface preparation:

• Remove all traces of wax or oil finish with paint thinner.
• Sand the surface following the direction of the wood grain using a 120 grit sandpaper. For a floor; finish with a 150 grit sandpaper.
• Remove all sandblasting dust.
• Apply one coat (recommended)
• If you stained your wood, wait a minimum of 4 hours before using our Tung oil.

Application:

• Stir thoroughly in order to mix the pigments evenly with the oil to obtain a slightly amber color.
• Do a test in a discreet area to check if the color and effect obtained are those desired.
• Apply with a soft cloth or cotton blend (SamaN Kit 60-004) and let it penetrates for 5 to 10 minutes. Important: wipe off the excess with another soft and clean cloth immediately.
• To achieve a glossier surface, use one of the SamaN’s furniture polyurethane finishes seven days after applying our Tung oil.

Drying Time:

From 6 to 8 hours.

Cleaning Tools:

Clean all tools and equipment with paint thinner.

Contenus téléchargeables

Downloadable content