Frequently asked questions

Certification Saman 20 ans d'expérience
Find answers to your questions about our products here. If your question is not listed, contact us

The sanding may be the cause of your problem.  An uneven sanding leads to the wood’s pores opening unevenly which means the stain penetrates more in some areas then others.

The solution is to regularly change your sandpaper and apply the same strength to the sander and well as following the wood grain.  This process should be done one board at a time.

Whether you want to varnish a floor,  a piece of furniture or fine woodwork,  SamaN has the type of varnish that you need.  For each project,  a different type of varnish can be recommended.  Consult our product catalog on SamaN’s website or ask your dealer to obtain the one that’s right for you.

In addition to not leaving any overlapping marks and having a superior coverage rate,  the SamaN wood stains require just one coat.  So,  staining wood,  furniture and woodwork becomes child’s play!

Yes,  the stains are ready to use.  There is also a possibility to mix several stains together to obtain an infinate amount of colors.  Ask your dealer for more information

SamaN’s wood putty dries quickly and is easy to use.  The touch-ups made with wood putty can be stained,  painted,  varnished or lacquered.  You can obtain a beautiful finish.

The SamaN Perfection regenerator kits allows you to avoid the expensive costs related to a re-sanding project.

The SamaN Perfection floor regenerator protects and shines hardwood, laminate and vinyl floors. Do not use this product on a pre-oiled or waxed floors.

The SamaN Perfection Floor Regenerator gives your floor a rich, long lasting shine in a fast and easy way! The unique shape and swivel head of the SamaN Perfection applicator allows you to clean normally hard to reach places. It contains an adhesion-enhancing cleaner, a reusable applicator and a 3 piece handle.

La couche de revitalisant est probablement trop mince ou le plancher trop chaud. Lors de votre prochaine application, essayer de suivre les étapes mentionnées plus haut pour vous assurer d’un résultat optimal.

The SamaN Perfection Floor regenerator kit is no sanding,  no dust concept.

With AquaShine there is no rinsing required.  Furthermore,  the cleaner leaves no apparent residue.

It is recommended to be used once a week or as needed.

For stubborn stains you can put the cleaner directly on the stain or you can even use small amount of our concentrated cleaner.  Pour slowly to avoid getting more product on the floor than required.

We recommend using our AquaShine hardwood Floor maintenance products.  Please note that our maintenance products are also recommended for laminated surfaces.

The Aquashine cleaning products are just as effective as a laminate floor cleaner.  Laminate floors have laminated surfaces,  which is one of the reasons why our Aquashine cleaning products were developed.

Yes,  it can be used on both hardwood and laminate flooring.

No,  if used as instructed on the bottle,  it will leave a shine to your floors without damaging them.

You must use 4 parts water for 1 part of concentrated AquaShine.

  1. Dust surface with a clean cloth,  or for floors,  carefully vacuum to remove all dust and abrasives.
  2. Lightly spray the Aquashine cleaner on a section of the floor.
  3. Throughly wipe the floor surface.
  4. For stubborn stains,  pour a small amount of cleaner on a damp cloth and lightly rub.  Never pour directly onto a varnished surface,  this may cause damages.